Vending machine routine maintenance guide

Writer： Zhongda vending machines Time：2022-12-10 17:25 Browse：℃

Vending machine routine maintenance guide

I. Machine Cleaning and Maintenance

1.Machine cleaning and maintenance tools

It is recommended to use soft hand towels, soft paper towels or sponges dipped in warm water (neutral detergent can be added) to clean all parts of the vending machine inside and outside.

Do not use hard brushes, wire brushes or organic solvents such as decontamination powder, petrol, banana water, acetone, hot water or acids and alkalis to clean the vending machine. Do not use water for sloshing or rinsing as this may affect the electrical insulation.

2.Machine cleaning and maintenance cycle

If the vending machine is used for a long time, there will be a certain smell inside the cabinet (especially in the case of non-refrigeration), and it may even breed bacteria and affect the original taste of the goods, etc. It is recommended that the vending machine be cleaned and maintained once every 30 days, and if the machine is placed in an outdoor environment, it is recommended that the machine be cleaned and maintained once every 7-15 days.

3.Machine parts cleaning and maintenance methods

(1) Machine cleaning and maintenance

Use a slightly damp soft cloth to wipe the dirt places, such as the cargo aisle of each pallet, the front inside of the cabinet, the inside bottom of the cabinet, the pick-up bin, the inside and outside of the glass, the lifting mechanism, etc. And pay attention to the electrical parts surface should be wiped with a dry cloth.

(2) Refrigeration system cleaning and maintenance

The condenser in the refrigeration system is an important refrigeration part of the machine with refrigeration function. If it is covered with too much dust, it will affect the heat dissipation, resulting in shortening the service life of the parts and weakening the refrigeration effect of the machine. Therefore, the condenser components should be checked regularly for the presence of dust, etc. (It is recommended to get a professional to do this or to consult with the source manufacturer when purchasing the equipment)

(3) Cleaning and maintenance of the note dispenser/coin dispenser/coin returner/coin acceptor

Use a damp paper towel or slightly damp soft cloth to clean the note dispenser (inside the note inlet), coin dispenser (clear coin bucket and identification head), coin returner and coin acceptor (coin inlet).

Check whether there are any foreign objects inside the note dispenser, coin dispenser and coin refund dispenser, and whether there is any jamming or stagnation when coins are dropped or refunded, and if there are foreign objects or breakage, deal with them in time.

(4) Touch screen cleaning and maintenance

Use wet paper towel or slightly wet soft cloth to clean the surface of the touch screen and the border around the screen of dust and stains, etc. If foreign objects are found, clean them in time to avoid the phenomenon of no response to touch.

II. The Operation of Stop Using The Machine

If the vending machine stops using for a longer period of time, it should be unplugged, cut off the power supply and clean the vending machine in accordance with the methods described earlier when it is suspended and re-activated, while trying to do dustproof and waterproof treatment of the screen and the note dispenser, POS machine and power supply and other important parts. If it is outdoors/semi-outdoors or in a dusty environment, it is recommended to take a large fabric to cover and shield it.

Guangzhou Zhongda Smart Technology Co., Ltd is a dynamic and innovative company specialising in the R&D, design, manufacture and sales of smart vending machines, with over 6 years of experience in vending machine OEM and production. With our experienced R&D team, dynamic sales team and skilled workers, coupled with our strict quality control system and good after-sales service, Zhongda vending machines have been very popular since their launch.

Our factory is conveniently located in Panyu District, Guangzhou City, China, close to both Shiqi Metro Station and Guangzhou South Railway Station. Our group partner company has a professional sheet metal processing workshop (4000sqm), powder coating production line (3000sqm) and assembly workshop (3000sqm), all production processes are under our strict supervision, which enables us to provide the best products and services to our customers at home and abroad. You are welcome to click on our Zhongda Smart English website to learn more about our company and the vending machine products we produce, or you can search for Zhongda Vending Machine on Alibaba’s international trade website to send us an enquiry by selecting our products directly, and we look forward to having a long and friendly cooperation!