How to maintain vending machines on a daily basis? Make your vending machine grow against the grain

Writer： Zhongda vending machines Time：2022-10-27 18:16 Browse：℃

First of all, let’s ask the question, why should we do a good job of daily maintenance of vending machines?
Regular vending machine maintenance is the key to maintaining stable operation of the equipment, while also extending the life of the equipment, which in turn is an important factor that directly affects revenue.
Therefore, good routine maintenance of your vending machine is tantamount to an increase in operating hours in disguise, thus enabling your machine to make more money for you!

List of maintenance tools.
A dry towel, a bottle of neutral cleaner, some water, a small Phillips screwdriver, a non-metallic anti-static brush, a small handheld vacuum cleaner, etc. You can have more if you have more machines.

Frequency of maintenance parts and some notes.

First. Pick-up Port Cleaning
1.Canned drinks may be dropped and sprayed at the pick-up point, which may result in stains on other goods being shipped if not dealt with in time.
2.In summer, when the temperature changes and there is a lot of rain, stains and water can easily accumulate in the pick-up area because of the connection with the outside world.
Pick-up port in each replenishment need to check the hygiene situation, such as stains need to use a towel to clean up in a timely manner, so as not to contaminate the goods, bring the user a bad shopping experience, but also can not ignore the security risks.

Second, the Touch Screen Routine Maintenance
1.Wipe the touch screen with a dry towel to prevent touch failure due to too much dust.
2.If it affects consumers’ normal purchase, you need to check the USB interface of the touch frame to avoid poor contact.
Touch screen is an easily damaged object, you can check it every time you replenish the goods, and you can maintain it once a month. For semi-outdoor spots the frequency of maintenance can be increased.

Third, the Vending Machine Body Cleaning and Maintenance
As the saying goes, people depend on clothes and horses depend on saddles, so do vending machines.
1.When the vending machine is dusty, wipe it clean with a dry towel to keep its appearance neat and tidy.
2.If the dirt is serious, use a semi-dry towel or neutral cleaner to clean it u
3.If the machine has been used for a long time or has scratches or other damage, we recommend using a sticker to make the machine look neat and clean.
Please do not use acidic solvents or alkaline solvents, otherwise the window panel and other parts may be corroded and cracked or the body paint may fade. Do not use paint solvents, banana water or other chemicals as they may cause accidents!

Four. Check if the Spring is Working Properly
1.Test the cargo channel for abnormal spring rotation and adjust it.
2.Confirm that the angular position of the spring is reasonable.
3.Check if there is any loose motor wire.

Five. Tray Cleaning
Clean the vending machine shelves regularly by opening the door on this side of the goods aisle and wiping away dust with a dry cloth; if dust accumulation is serious, clean with a towel and neutral cleaner. Clean about once every two months, try to find personnel with cleaning experience is better.

Six, Each Wiring Interface Check
Check the wiring interfaces of each board of the equipment by
1.Plugging and unplugging the interfaces to ensure that all wiring connections are tight.
2.Clean the computer motherboard wiring with WD-40 cleaner if oxidation is found.
This is done approximately once every three months and can be drained after replenishment, if you encounter a fault that cannot be resolved then you will need to call a repairman immediately.

Seven, Condenser Cleaning
The condenser is the compressor with the use of components, is an effective guarantee of the cooling function. About once a year before the arrival of summer ready to open the compressor check and clean, with a hoover and anti-static cleaning brush, the condenser heat sink attached to the rubbish or dirt swept away. Long periods of non-cleaning will result in poor cooling, electricity consumption and serious compressor failure.

[Note] Use anti-static brushes made of materials other than metal, move in the up and down direction to clean, you can also use a hoover to suck outwards, otherwise it will affect the machine cooling, such as dirty serious need to disassemble the cooling unit for deep cleaning.

If the vending machine is not used for a long time you can do the following to reduce wear and tear.
1.Lock the vending machine when it is not in use for a long period of time.
2.Remove all goods from the machine and clean the aisles to avoid rusting.
3.Set the earth leakage protection switch to OFF and be sure to disconnect the power.
4.Wipe down the outside of the machine and keep it dry.
5.Empty any water that has accumulated in the evaporator water reservoir, clean and dry it.
6.Ensure that the appliance is stored in an environment that is protected from rain, moisture and sunlight and that it is covered with a protective cover etc. for safe keeping.