What should we do when there is a problem with spring-type vending machines?

Writer： Zhongda vending machines Time：2022-05-24 16:25 Browse：℃

With the development of the times, people’s demand for vending machines is expanding, but inevitably there will be some failures in the process of use. Here are some common failures that may occur in our company’s most popular spring-type vending machines, as well as the corresponding treatment methods.

The first situation: the vending machine can ship, but not change how to do?
There are three general reasons for this situation. The first reason is that there is no change in the machine reserve, the treatment is to replenish the machine reserve in time to replenish the change. The second reason is that there is still change in the machine, but the default value in the system has changed to zero. The second reason is that there is still change in the vending machine, but the default value in the system is zero. The third reason is that there is a problem with the vending machine’s change function accessories. The treatment is to open the vending machine, take out the stuck currency, carefully check the relevant structure for errors, if it is a simple misalignment can be repaired manually by yourself, if it is a deeper problem or a serious failure need to contact the vending machine vending side for repair.

Second scenario: How to deal with stuck vending machine goods?
This is usually a vending machine equipped with springs. This can be done by removing the stuck goods and then entering the fault option in the back office management page to clear the stuck goods fault. In the following operation, pay attention to the neat arrangement of the goods, especially the size of the goods should try to fit the size of the goods aisle, not too small or too big, and pay attention to the placement and orientation of different kinds of goods, otherwise it is likely to cause the goods to get stuck again.

The third situation: vending machine payment after the machine does not ship how?
There are two general reasons for this situation. The first reason is that the merchant’s payment system has been maliciously tampered with, which is a crime, and it is recommended to report it after verification; the second reason is that the network signal is poor and unstable. The treatment is to find out the signal line, the signal line will be pulled out of the vending machine external signal detection, it should be noted that sometimes the signal shows full or cell phone can be connected does not mean that the vending machine can also be linked smoothly, at this time may appear vending machine any network situation, the best way is to directly link the vending machine with a network cable.

The above fault applies to vending machines with spring channels and other vending machines that can be adapted to the conditions under which the problem occurs. In case of unsolvable problems, it is recommended to seek the help of professional maintenance personnel.