How to solve the common failures of vending machines?

Writer： Zhongda vending machines Time：2022-09-22 18:20 Browse：℃

What if the vending machine is stuck? This problem usually occurs in the spring-type vending machines. Operators may know which brand of vending machine is of good quality, but they do not know how to deal with it quickly when the vending machine breaks down. Here’s how to handle common malfunctions.

Vending machine stuck, one is jammed paper jammed, pay after processing goods do not give change; two is the goods stuck in the exit or halfway; three is payment after the goods do not ship, etc., for these points, I give detailed solutions.

1.The vending machine out of the goods, but do not give change.

The reasons are the following:
a. There is no change in the change machine.
b. There is money in the change machine, but the default change to zero in the system.
c. The change dispenser is stuck.
Solution:
a. Replenish the change.
b. Enter the background management page, check whether it is zero, modify the number of change in the background.
c. Open the zero machine to remove the stuck currency, clean up the dust around.

2.Vending machine card goods

Usually the vending machines that will occur jammed goods are equipped with springs. In the case of a jam, the spring exerts a squeezing force on the merchandise when the machine is shipped. Squeeze pressure is divided into positive and oblique. Goods that are squeezed in the positive direction tend to tip over, or even fall over. This causes the merchandise to get stuck under the cargo aisle springs; inclined squeeze increases the friction between the cargo and the guards on both sides of the cargo aisle. When the friction is high, it can cause the merchandise to not ship properly.
Solution:
First take out the stuck goods, then go to the backend management page fault option to clear the stuck goods fault that. And in future operations, pay attention to the neat placement of goods, especially the size of the goods should be as consistent as possible with the size of the cargo aisle, not too small or too large.

3.Payment after the goods do not ship

There are the following reasons.

1. The merchant’s payment code is maliciously replaced.
2. Poor and unstable network signal.
   Solution.
3. Check whether the payment code has been changed.
4. Find the signal line pulled out of the machine to detect the signal.